
Installation Instructions: AM-650 1/4" Streaming Tape Drive Page 9
PDI-00650-00, Rev. A00
DWF-20218-00
MAKE SURE THE DRIVE'S
FRONT PANEL IS POINTED IN THE
DIRECTION INDICATED BY THE ARROW
A
B
C
C
B
A
SCSI DAT OR STREAMING TAPE DRIVE, or
ANY 5-1/4" HALF-HEIGHT SCSI HARD DISK DRIVE
AM-645 FULL-HEIGHT 8MM MAGNETIC TAPE DRIVE, or
ANY 5-1/4" FULL-HEIGHT SCSI HARD DISK DRIVE
ANY 5-1/4" HALF-HEIGHT FLOPPY DISKETTE DRIVE, or
ANY 5-1/4" HALF-HEIGHT SCSI HARD DISK DRIVE
Figure 4 - Plastic Mounting Base
4. Set the drive assembly into its mounting position inside the chassis.
5. Set the metal support bracket on top of the drive assembly as shown in Figure 3. Position the
bracket so the mounting hole shown in Figure 5 aligns with the screw hole on the side of the
AM-650, and the screw hole to attach the drive assembly to the front bezel aligns with the screw
hole in the front bezel.
Comentários a estes Manuais