Alpha Microsystems SCSI Especificações Página 8

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 53
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 7
Page 4 Installation Instructions: SCSI Disk Drives
Figure 1 shows two different types of external SCSI connectors.
1.Configuration"A" shows an extended external SCSI connector and bail
locks for holding the terminator in place. This configuration is used on
almost all of Alpha Micro’s currently available product. The terminator is
installed by sliding it over the connector and then latching the bail locks
into the notches in the terminator.
2.Configuration"B" shows a flush mounted external SCSI connector. The
only product Alpha Micro currently offers using a flush mounted external
SCSI connector is the pedestal (also known as the "Classic") chassis. In
this configuration, the terminator inserts into a cutout in the sheet metal
and over the SCSI connector. The terminator is held in place with two
#4screws and washers.
6.1Termination Procedure (Without External Terminator)
1.AM-14XX, AM-16XX, or pedestal computers with one SCSI hard disk drive
can have that hard disk drive installed with its terminators removed.
2.If an AM-14XX, AM-16XX, or pedestal computer has more than one SCSI
device, the last SCSI device, the device attached to the connector farthest
down the cable away from the CPU board must be terminated.
3.If an AM-14XX, AM-16XX, or pedestal computer includes a SCSI magnetic
tape drive as its only SCSI device, the tape drive must have its terminators
installed.
4.For AM-990, 10-slot rack mount VME, and 21-slot rack mount VME
computers, the last SCSI device attached to the connector farthest down
the cable away from the CPU board must have its terminators installed. If
only one SCSI device is installed, that device must be terminated.
5.For subsystem installations, the last SCSI device attached to the
connector farthest down the cable away from the host computer must have
its terminators installed.
AM-1000 and AM-1200 computers follow the same termination procedure used by
AM-14XX, AM-16XX, and pedestal computers.
PDI-00436-20, Rev. A15
Vista de página 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Comentários a estes Manuais

Sem comentários