Alpha Microsystems Eagle 100 Guia de Instalação Página 10
- Página / 42
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Page 2-4 Chapter Two
AlphaNET Installation Guide, Revision 05
DRIVER=AM319
NETWORK=100
GROUP=1
NODE=1 ; Each computer must have unique node number
; within same network and group.
NODECHECK=ON
NODECOUNT=2
GROUPCOUNT=1
NAME=Accounting Network
; DEVICEADDRESS=6
The sections below discuss each of these lines.
DRIVER=
Our network is based on two Eagle 300s, which use a driver called AM319.NDV, so the correct entry for
the DRIVER statement is AM319. (It is not necessary to enter the .NDV extension.)
NETWORK=
The NETWORK parameter can be assigned any number from 1 to 254; the actual number has no
significance. In the example above we used 100. As the network is expanded, any new computers using
Ethernet hardware that are directly connected to our existing network will be assigned the same network
number.
GROUP=
In our sample network initialization file, the GROUP parameter has been assigned the number 1. The
group number, like the network number, is used for identification; the actual number has no real
meaning. Since our network only has two computers, making up one group, we are using the simplest
identification
the number 1. However, any number from 1 to 254 can be used as a valid group number.
You could easily construct a 20-computer network in the same way we built our two-computer
network. You may want to assign some of these computers different group numbers based on
their location in your facility or based on the departments they support. You may also choose to
assign them the same group number; the choice is yours.
NODE=
Unlike network and group numbers, two computers cannot share the same node number. Each computer
must have its own unique node number. Our network example only has two computers, so the logical
thing to do is to assign one computer node 1 and the other node 2. The NODE parameter will accept any
number from 1 to 65535.
- AlphaNET 1
- Installation Guide 1
- © 1996 Alpha Microsystems 2
- Table of Contents 3
- Page ii Table of Contents 4
- Chapter 1 - Introduction 5
- ABOUT THIS BOOK 6
- STEPS TO BUILDING A NETWORK 7
- • Two BNC T-connectors 8
- NETWORK= 10
- GROUP= 10
- 6. Create a SYSNAM.DAT File 12
- Page 2-8 Chapter Two 14
- TDVDEF * 15
- 8. Create a NETSER.JIN File 16
- 9. Create a VTSER.JIN File 16
- TESTING THE NETWORK 17
- Chapter 3 - Installing the 18
- AlphaNET Software 18
- Reviewing Your PIC 19
- Setting Up Sharable Memory 21
- Page 3-6 Chapter Three 23
- Defining a Network 24
- Page 3-8 Chapter Three 25
- Turning on the Network 26
- Page 3-10 Chapter Three 27
- Why Use Type 2 Connections? 28
- Page 3-12 Chapter Three 29
- PRODUCT DESCRIPTION 31
- SerialNET Specifications 31
- Page 4-2 Chapter Four 32
- SETTING UP ERSATZ NAMES 33
- Page 4-4 Chapter Four 34
- Gateways 35
- Four Networks 36
- Page 5-4 Chapter Five 38
- (Continued) 38
- Page 5-6 Chapter Five 40
- Page ii Index 42
Manuais e produtos relacionados com Barebones PC/estação de trabalho Alpha Microsystems Eagle 100
(37 páginas)Philips HQ200/52 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Rasiererzubehör Philips HQ200/52.
Wir stellen 2 PDF-Handbücher Philips HQ200/52 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Comentários a estes Manuais